|Firebird Documentation Index → Firebird 2.5 Quick Start → Installing Firebird|
The instructions given below for the installation of Firebird on Windows and Linux should be sufficient for the vast majority of cases. However, if you experience problems or if you have special needs not covered here, be sure to read the INSTALLATION NOTES chapter in the Release Notes. This is especially important if you are upgrading from a previous version or if there are remnants of an old (and maybe long gone) InterBase or Firebird installation floating around your system (DLLs, Registry entries, environment variables...)
Firebird server – and any databases you create or connect to – must reside on a hard drive that is physically connected to the host machine. You cannot locate components of the server, or any database, on a mapped drive, a filesystem share or a network filesystem.
You can mount a read-only database on a CD-ROM drive but you cannot run Firebird server from one.
Although it is possible to install Firebird by a filesystem copying method – such as
“untarring” a snapshot build or decompressing a structured
.zip archive – it is strongly recommended that you use the
distributed release kit (
.exe for Windows,
for Linux), especially if this is the first time you install Firebird. The Windows
installation executable, the Linux rpm program and the
install.sh script in the official
.tar.gz for various Posix platforms all perform some essential
setup tasks. Provided you follow the installation instructions correctly, there should be
nothing for you to do upon completion but log in and go!
The Firebird installer lets you choose between Superserver and Classic/SuperClassic. Each model is fully stable and there is no reason to categorically prefer one to the other. Of course you may have your own specific considerations. When in doubt, consult the Classic, SuperClassic or Superserver chapter again.
If you install Firebird under Windows 95/98/ME, uncheck the option to install the Control Panel applet. It doesn't work on these platforms. You'll find a link to a usable applet further down. (Note: the option to install the applet is only available for Superserver.)
On Windows server platforms – NT, 2000/3/8, XP, Vista and 7 – Firebird will run as a system service by default, but during the installation you can also choose to let it run as an application. Non-server Windows systems – 95, 98 and ME – don't support services; running as an application is the only option there.
The Firebird Guardian is a utility that monitors the server process and tries to restart it if it terminates abnormally. The Guardian does not work with Firebird Classic Server on Windows if run as an application. This is due to a known bug, which may be fixed later. Currently the Firebird 2.5 installer doesn't give you the option to include the Guardian at all with a Classic Server, even if you install it as a service.
The Guardian works correctly with Superserver, whether run as an application or as a service.
If you run Firebird as a service on Windows 2000 or newer, the Guardian is a convenience rather than a necessity, since these operating systems have the facility to watch and restart services. It is recommended that you keep the Guardian option on (if possible) in all other situations.
In all cases, read the Release Notes that came with your Firebird package (chapter Installation Notes, section Posix Platforms). There may be significant variations from release to release of any Posix operating system, especially the open source ones. Where possible, the build engineers for each Firebird version have attempted to document any known issues.
If you have a Linux distribution that supports rpm installs, consult the appropriate platform documentation for instructions about using RPM Package Manager. In most distributions you will have the choice of performing the install from a command shell or through a GUI interface.
For Linux distributions that cannot process rpm programs,
and for Unix flavours for which no
.rpm kit is
provided, use the
.tar.gz kit. You will find detailed
instructions in the Release Notes.
Shell scripts have been provided. In some cases, the Release Notes may instruct you to edit the scripts and make some manual adjustments.
Firebird allows the operation of multiple servers on a single machine. It can also run concurrently with Firebird 1.x or InterBase servers. Setting this up is not a beginner's task though. If you need to run multiple servers, consult the Installation Notes chapter of the Release Notes, and have the Firebird 1.5 Release Notes handy too – you will be directed to them at a certain point during your reading of the Installation Notes.
If everything works as designed, the Firebird server process will be running on your server machine upon completion of the installation. It will also start up automatically whenever you restart your computer.
Before testing the Firebird server itself, it is advisable to verify if the server machine is reachable from the client at all. At this point, it is assumed that you will use the recommended TCP/IP network protocol for your Firebird client/server connections.
If you have installed a Classic/SuperClassic Server on Linux/Unix or any Firebird server on Windows, it is possible to connect directly to the local server, without using a network layer. If you intend to use Firebird for this type of connection only, you can skip the “Pinging the server” section below.
For information about using the NetBEUI protocol in an all-Windows environment, refer to the Network Configuration chapter in the Using Firebird manual sold by IBPhoenix, or consult the InterBase 6 Operations Guide (http://www.ibphoenix.com/files/60OpGuide.zip).
Firebird does not support IPX/SPX networks.
The ping command – available on most systems – is a quick and easy
way to see if you can connect to a server machine via the network. For example, if your
server's IP address in the domain that is visible to your client is
184.108.40.206, go to a command shell on the client machine and
type the command
substituting this example IP address with the IP address that your server is broadcasting. If you are on a managed network and you don't know the server's IP address, ask your system administrator. Of course you can also ping the server by its name, if you know it:
If you are connecting to the server from a local client – that is, a client running on the same machine as the server – you can ping the virtual TCP/IP loopback server:
ping localhost –or– ping 127.0.0.1
If you have a simple network of two machines linked by a crossover cable, you can set up your server with any IP address you like except 127.0.0.1 (which is reserved for a local loopback server) and, of course, the IP address which you are using for your client machine. If you know the “native” IP addresses of your network cards, and they are different, you can simply use those.
Once you have verified that the server machine is reachable from the client, you can go on to the next step.
After installation, Firebird server should be running:
As a service.
As a service or as an application. Service is default and highly recommended.
As an application.
The following sections show you how to test the server in each of these situations.
Use the top command in a command shell to inspect the
running processes interactively. If a Firebird Superserver is running, you should see a
fbguard. This is the Guardian
process. Further, there will be one main and zero or more child processes named
The following screen shows the output of top, restricted
by grep to show only lines containing the characters
frodo:/inkomend/firebird # top -b -n1 | grep fb 2587 firebird 24 0 1232 1232 1028 S 0.0 0.3 0:00.00 fbguard 2588 firebird 15 0 4124 4120 2092 S 0.0 0.9 0:00.04 fbserver 2589 firebird 15 0 4124 4120 2092 S 0.0 0.9 0:00.00 fbserver 2604 firebird 15 0 4124 4120 2092 S 0.0 0.9 0:00.00 fbserver 2605 firebird 15 0 4124 4120 2092 S 0.0 0.9 0:00.02 fbserver 2606 firebird 15 0 4124 4120 2092 S 0.0 0.9 0:00.00 fbserver 2607 firebird 15 0 4124 4120 2092 S 0.0 0.9 0:00.00 fbserver
As an alternative to top, you can use ps -ax or ps -aux and pipe the output to grep.
For Classic Server, the process name is
fb_inet_server. There will be one instance of this process
running for each network connection. Note that if there are no active connections, or if
there are only direct local connections, you won't find
fb_inet_server in the process list.
fb_lock_mgr should be present though as soon as any kind of
Classic connection has been established.
For SuperClassic, the process name is
fb_smp_server and it will visible as soon as the service is
started. SuperClassic, just like Superserver, does its own port-listening, so it will be
running even if there are no connections.
Other ways to test a Firebird server immediately after installation include connecting to a database, creating a database, and launching the gsec utility. All these operations are described later on in this guide.
Open Control Panel -> Services (NT) or Control Panel -> Administrative Tools -> Services (2000/3/8, XP, Vista, 7).
You should at least find the Firebird server in the services listing. The Guardian may or may not be running, depending on the choices you made during installation.
If Firebird is up and running as an application, it is represented by an icon in the system tray:
A green and grey server symbol if controlled by the Guardian;
A round yellow and black graphic if running standalone.
A flashing icon indicates that the server is in the process of starting up (or at least trying to do so). A red icon, or an icon with an overlying red stop sign, indicates that startup has failed.
One way to make 100% sure if the server is running or not is to press Ctrl-Alt-Del
and look for the
fb_inet_server process (and possibly
fbguard) in the task list.
On some occasions, you may need to start the Guardian or server once explicitly via the Start menu even if you opted for “Start Firebird now” at the end of the installation process. Sometimes a reboot is necessary.
If you're desperately trying to start Firebird and nothing seems to work, ask yourself if you've installed Firebird 2.5 (Super)Classic server with the Guardian option enabled (the installation program doesn't offer this possibility anymore, but there are other ways). As said before, the combination (Super)Classic + Guardian currently doesn't work if Firebird runs as an application. Uninstall Firebird if necessary and reinstall (Super)Classic without Guardian, or Superserver with or without Guardian.
You can shut the server down via the menu that appears if you right-click on the tray icon. Notice that this also makes the icon disappear; you can restart Firebird via the Start menu.
Windows Classic Server (but not SuperClassic!) launches a new process for every
connection, so the number of
processes will always equal the number of client connections plus one. Shutdown via the
tray icon menu only terminates the first process (the listener).
Other processes, if present, will continue to function normally, each terminating when
the client disconnects from the database. Of course, once the listener has been shut
down, new connections can't be made.
In the case of Superserver you can also use a Control Panel applet to check and alter the Firebird server status. Some available applets will be presented a little later in this guide.
Each remote client machine needs to have the client library –
libfbclient.so on Posix clients,
fbclient.dll on Windows clients – that matches the release
version of the Firebird server.
Firebird versions from 1.5 onward can install symlinks or copies named after the 1.0 libs (with the “old” InterBase names), to maintain compatibility with third-party products which need these files.
Some extra pieces are also needed for the client-only install.
At present, no separate installation program is available to install only the client pieces on a Windows machine. If you are in the common situation of running Windows clients to a Linux or other Unix-like Firebird server (or another Windows machine), you need to download the full Windows installation kit that corresponds to the version of Firebird server you install on your server machine.
Fortunately, once you have the kit, the Windows client-only install is easy to do. Just run the installation program, and when you arrive at at the “Select Components” screen, choose one of the client-only options from the drop-down list or uncheck the “Server Components” checkbox.
A small-footprint client install program for Linux clients is not available either. Additionally, some Posix flavours – even within the Linux constellation – have somewhat idiosyncratic requirements for filesystem locations. For these reasons, not all *x distributions for Firebird even contain a client-only install option.
For most Linux flavours, the following procedure is suggested for a Firebird
client-only install. Log in as
n being the patch version number) in
/opt/firebird/lib on the machine where the Firebird server
is installed. Copy it to
/usr/lib on the client
/usr/lib64 if both server and client are
Create chained symlinks using the following commands:
ln -s /usr/lib/libfbclient.so.2.5.
ln -s /usr/lib/libfbclient.so.2 /usr/lib/libfbclient.so
with your version
If you're running applications that expect the legacy libraries to be present, also create the following symlinks:
ln -s /usr/lib/libfbclient.so /usr/lib/libgds.so.0
ln -s /usr/lib/libfbclient.so /usr/lib/libgds.so
firebird.msg to the client machine, preferably into the
/opt/firebird directory. If you place it
somewhere else, create a system-wide permanent
variable pointing to the right directory, so that the API routines can locate the
Optionally copy some of the Firebird command-line tools – e.g.
isql – to the client machine. Note:
always copy the tools from a Superserver kit, regardless of the architecture of the
server(s) you're planning to connect to. Tools from Classic distributions terminate
immediately if they can't find the
library (which is useless for network connections) upon program start.
Instead of copying the files from a server, you can also pull them out of a Firebird
tar.gz kit. Everything you need is located in the
/opt/firebird tree within the
buildroot.tar.gz archive that's packed inside the kit.
|Firebird Documentation Index → Firebird 2.5 Quick Start → Installing Firebird|